Lubrication pumps are devices that deliver lubricant to various parts of a machine or system, reducing friction and wear, and increasing efficiency and performance. The P301 lubrication pump is a type of lubrication pump that has many advantages over other models, such as:
– It is compatible with progressive lubrication systems, which are the most common and effective way of distributing lubricant to multiple points in a precise and controlled manner.
– It has a modular design, which allows it to be customized and adapted to different applications and requirements. It can be equipped with up to three pump elements, each with a different output rate, and various control boards that enable different operating modes and functions.
– It has a high-performance motor, which can operate with either DC or AC power supply, and can handle a wide range of lubricants, from grease to oil, with different viscosity and temperatures.
– It has a robust and durable housing, which protects it from dust and water ingress, and can withstand harsh environments and conditions. It has a protection class of IP6K9K, which means it is resistant to high-pressure water jets and steam cleaning.
– It has a large and easy-to-fill reservoir, which can store up to 15 liters (3.96 gallons) of lubricant, and has a stirring paddle that prevents the lubricant from settling and separating. It can be filled from the top or the bottom, and has a low-level signal that warns when the lubricant level is too low.
– It has a simple and convenient installation, which can be done vertically, with a bracket for fixing the pump and the main metering device. It has a standard electrical connection, and can be connected to various accessories, such as pressure relief valves, adapters, fittings, and hoses.
The P301 lubrication pump is a versatile, compact and economical solution for lubrication management. It can help reduce maintenance costs, extend the service life of the machine or system, and improve the reliability and safety of the operation.
Time Setting
To set the pause time
The pause time can be set to 15 different settings by means of the blue rotary switch.
Pause time range
Factory setting
Rotary switch on : …………………………………………………… 6 hours
or ………………………………………………………………… 22.5 minutes
β’ The time ranges can be modified by replugging the jumper (Fig. 5) on the printed circuit board.
Operating Time
To set the operating time
β’ The operating time can be set to 15 different setting by means of the red rotary switch.
Factory setting
Rotary switch on : ……………………………………………….. 6 minutes
or ………………………………………………………………. 22.5 seconds
β’ The time ranges can be modified by replugging the jumper (Fig. 7) on the printed circuit board.
